Laser Cutting Services in Türkiye

Black, cold-rolled, pickled, stainless (304/316), aluminium, galvanized, Zn-Al-Mg and Hardox. Carbon steel up to 30 mm at laser quality, and a dedicated laser unit for tube and profile.

Any quantity, from a one-off prototype to series. A DXF, DWG, PDF or dimensioned sketch is enough.

Nitrogen-based cutting of carbon steel needs far more laser power than oxygen cutting, which is why many plants limit it to thin and medium gauges and cut thicker plate with oxygen. On our 20 kW fiber laser we cut carbon steel up to 20 mm with nitrogen-based mixed-gas technology: a nitrogen-rich mix with a small share of oxygen. Oxidation of the cut edge is kept to a minimum, so cut faces are cleaner and corners, small holes and fine details come out sharper and truer to size. Because no heavy oxide layer forms on the edge, priming, painting, powder coating, coating and hot-dip galvanizing give far more consistent results on the cut edges. Thicker plate is cut with oxygen.

Cut parts are bent in the same plant on a 1,000-ton press brake up to 8 m long, and welded and assembled if needed. We supply the material from our own stock, so you do not need a separate steel supplier.

We ship anywhere in Türkiye and abroad. High power lowers the cost per part, especially on thick plate and volume work.

We manufacture for customers in Istanbul, Ankara, Bursa, Izmir, Kocaeli, Konya and every other industrial city in Türkiye, and for projects in Europe, the Middle East and the USA. Send your drawing by email or through the quote form: our technical team confirms price and lead time, and after approval we pack and ship the parts for you.

You deal with one contact throughout. Because material, cutting, bending, roll forming and welding happen in one plant, your parts never travel between workshops, and tolerances and lead time are managed from one place.