Steel Service Centre in Türkiye
Yılmaz Sac Profil is a steel service centre in Türkiye that supplies tube, box section, sheet and structural steel from its own stock and processes it in the same plant: a 20 kW fiber laser cuts carbon steel up to 30 mm with oxygen and up to 20 mm with nitrogen-based mixed gas, a 1,000-ton press brake bends parts up to 8 m in one piece, plate is rolled up to 5,000 mm diameter, and its own roll-forming lines produce 1–6 mm profiles at more than 2,500 tons a month. It delivers across Türkiye and to Europe, the Middle East and North America.
What is a steel service centre?
A steel service centre holds steel in stock and delivers it cut, bent or formed to the dimensions the customer needs, rather than in standard mill lengths and sheet sizes. Instead of buying material from a stockholder and moving it between workshops for cutting and bending, the buyer receives ready-to-use parts from one supplier.
At Yılmaz Sac Profil the whole chain runs in one plant: material, cutting, bending, roll forming and welding. Tube, profile, sheet and structural steel come from our own stock; parts are cut by laser, plasma or saw, bent on the press brake or the plate rolls, and welded and made assembly-ready where needed. For series open profiles, coil is formed on our own roll-forming lines.
What do we stock, and how is it processed?
Stock falls into four groups: tube and box section, sheet, structural steel, and the roll-formed open profiles we make on our own lines. The table shows what each group covers and which processes apply to it; sizes and grades are detailed on the tube and profile, sheet and structural steel pages.
| Product group | Range | Processing |
|---|---|---|
| Tube and box section | Square and rectangular hollow sections (15×15 – 500×300 mm, EN 10219), ERW tube (Ø 21.3 – 355.6 mm), galvanized tube, water-gas pipe | Saw cut to length; holes, notches and end contours on the tube laser; bending into curves, rings and special forms; weld-ready ends |
| Sheet | Hot-rolled black, cold-rolled (DKP), pickled (HRP), chequered, expanded, galvanized, Zn-Al-Mg (ZM), stainless and Hardox | 20 kW fiber laser cutting; plasma and oxy-fuel on thick plate; 1,000-ton press-brake bending; cylindrical and conical rolling |
| Structural steel | HEA/HEB, IPE, NPI, UPN channels, angles, tee bars, flat, square and round bar (EN 10025) | Cut to length; welding and assembly (fabrication to EN 1090) |
| Roll-formed open profiles | C, U, Z, sigma, omega and custom sections; 1–6 mm; DX51D+Z, Zn-Al-Mg (ZM), S350GD–S450GD, black steel | In-line holes, slots and cut-outs; cut to your length list; 2,500+ t/month |
What processing capacity is in the plant?
On thick plate and long parts, the machine limits decide what can be made in one piece. The upper limits of our cutting, bending and forming lines are in the table; on the press brake, 8 m length and 25 mm thickness are separate maxima, and on heavy plate the bendable length depends on thickness and grade and is confirmed at quotation.
| Process | Capacity |
|---|---|
| Fiber laser cutting | 20 kW; carbon steel up to 30 mm with oxygen, up to 20 mm with nitrogen-based mixed gas; ±0.1 mm |
| Tube and profile laser | Dedicated unit; holes, notches and end contours in box section and tube in one operation |
| Plasma and oxy-fuel cutting | Thick plate and heavy fabrication parts where laser is uneconomical |
| Press-brake bending | 1,000 tons, servo-controlled; parts up to 8 m in one piece and plate up to 25 mm (separate maxima) |
| Cylindrical and conical rolling | Up to 5,000 mm diameter and 20 mm thick; silo, tank, stack and hopper shells |
| Tube and profile bending | Curves, rings and special forms in square, rectangular and round sections |
| Roll forming | C, U, Z, sigma, omega and custom sections; 1–6 mm; 2,500+ t/month; tooling and rolls made in-house |
| Welding and assembly | Fabrication to EN 1090; ISO 9001 quality management system |
From stock to assembly-ready part: how does an order run?
You send a drawing (DXF, DWG or PDF) or a dimensioned sketch with material, thickness and quantity. Our technical team plans the material from stock, chooses the cutting method for the part (laser, plasma or saw) and states price and lead time in the quotation.
After approval the part is cut, bent and welded where required, then packed, labelled and shipped. When cutting and bending are done in different shops, deviations add up and responsibility blurs; in one plant the tolerances match and you deal with one contact throughout.
We take any quantity, from a one-off prototype to series production, and can also process material you supply.
Which industries do we supply?
Our main customer industries are steel construction and industrial buildings, machinery and equipment, agricultural machinery, trailer and vehicle chassis, racking and storage, greenhouses, silo and tank fabrication, and solar power plants. Solar steel is made under our Y Solar brand; to date we have supplied more than 1 GW of it.
Supplying Europe: shipping and documents
Yılmaz Sac Profil ships from its plant in Türkiye to Europe, the Middle East and North America by truck or container. We handle packing and prepare the loading plan ourselves; for profiles it is planned around the profile length.
EN 10204 3.1 mill certificates, certificates of origin and shipping documents are provided on request. Delivery terms (EXW, FOB or CIF) and the lead time are agreed at quotation. Enquiries in English: contact@yilmazsacprofil.com.
Delivery across Türkiye and abroad
We manufacture for industrial companies across Türkiye and for projects in Europe, the Middle East and the USA, on jobs that need laser cutting of plate up to 30 mm (with oxygen), bending up to 8 m in one piece, plate rolling up to 5,000 mm diameter or series roll forming up to 6 mm.
We arrange delivery to every province in Türkiye and abroad. Send your drawing by email or through the quote form: our technical team confirms price and lead time, and after approval we pack and ship the parts for you.
You deal with one contact throughout. Because material, cutting, bending, roll forming and welding happen in one plant, your parts never travel between workshops, and tolerances and lead time are managed from one place.
Frequently asked questions
What does a steel service centre do?
It holds steel in stock and delivers it cut, bent or formed to the customer's dimensions. At Yılmaz Sac Profil, tube, profile, sheet and structural steel stock, a 20 kW fiber laser, plasma cutting, a 1,000-ton press brake, plate rolling, roll forming and welding are all in one plant.
What are your cutting and bending limits?
On the 20 kW fiber laser we cut carbon steel up to 30 mm with oxygen and up to 20 mm with nitrogen-based mixed gas; thicker plate is cut by plasma or oxy-fuel. The 1,000-ton press brake bends parts up to 8 m in one piece and plate up to 25 mm thick (separate maxima). Cylindrical and conical rolling goes up to 5,000 mm diameter.
Do you supply the material?
Yes. Tube, box section, sheet and structural steel come from our own stock and are cut and bent in-house, so you do not need a separate steel supplier. We can also process material you supply.
Is there a minimum order quantity?
For cutting and bending there is no hard minimum — we handle one-off parts too. Custom roll-formed profiles need their own tooling, so they need a worthwhile volume.
What should I send for a quote?
A DXF, DWG or PDF drawing or a dimensioned sketch, with material, thickness, quantity and delivery location. Upload the files through the quote form or email them to contact@yilmazsacprofil.com.
Do you supply customers in Europe, and with which documents?
Yes. We ship from Türkiye to Europe, the Middle East and North America by truck or container. EN 10204 3.1 mill certificates and certificates of origin are provided on request; delivery terms (EXW, FOB, CIF) are agreed at quotation.
More from our plant in Türkiye
Roll Forming Manufacturer in Türkiye
Yılmaz Sac Profil is a roll forming manufacturer in Türkiye, working steel since 1962: on tooling it designs in-house it produces C, U, Z, sigma, omega and drawing-specific open profiles, 1–6 mm thick, at more than 2,500 tons a month, for customers across Türkiye and abroad.
Solar Mounting Structure Manufacturer in Türkiye
Y Solar is the solar brand of Yılmaz Sac Profil: it rolls the steel for utility and commercial solar mounting structures, including C, U and sigma piles, on its own lines and has supplied more than 1 GW of solar steel to date. We deliver it, engineered, to projects in Türkiye and abroad.
Laser Cutting Services in Türkiye
Yılmaz Sac Profil is a steel processor offering subcontract laser cutting on a 20 kW fiber laser to customers across Türkiye and abroad: carbon steel up to 30 mm with oxygen and up to 20 mm with nitrogen-based mixed gas, with tube and profile cut on a dedicated laser unit. Cutting, bending and welding happen in one plant.
Press-Brake Bending Services in Türkiye
Yılmaz Sac Profil provides subcontract press-brake bending on a 1,000-ton press for customers across Türkiye and abroad: bending length up to 8 m in one piece, plate thickness up to 25 mm. Cutting, bending and welding happen in one plant.
C, Z and Sigma Purlin Manufacturer in Türkiye
Yılmaz Sac Profil manufactures C, Z and sigma purlins in Türkiye to the customer's drawing, 1–6 mm thick, on tooling it designs and makes in-house, with more than 2,500 tons a month of roll-forming capacity. For roofs and walls, warehouses and industrial buildings, solar and racking, the purlins are rolled from DX51D+Z galvanized, Zn-Al-Mg (ZM) coated, S350GD–S450GD structural-grade or black steel, punched and cut to length in-line, and shipped across Türkiye and to Europe, the Middle East and North America.
Buying Steel Profiles from Türkiye
Yılmaz Sac Profil ships roll-formed steel profiles from its plant in Türkiye to buyers across Europe: C, U, Z, sigma, omega and custom sections in 1–6 mm, rolled on in-house tooling at more than 2,500 tons a month, together with laser-cut, press-braked and rolled parts from the same plant. Production follows EN 10346, EN 10025 and EN 10162 under an ISO 9001 quality management system; goods travel by truck or container, EN 10204 3.1 mill certificates and certificates of origin are provided on request, and EXW, FOB or CIF terms are agreed at quotation.
Get a quote for your project
Send us your requirements and our technical team will prepare a price offer based on dimensions, quantity and delivery terms as soon as possible.