Laser Cutting in Kayseri

In subcontract laser cutting, machine power feeds straight through to your cost and lead time. Machines in the 4-6 kW class are common in the region; our line is 20 kW. That means two things: we can cut thicker material, and we produce the same part markedly faster.

The difference shows most on thick plate. Above 15-20 mm in carbon steel, lower-power machines either crawl or lose edge quality, and most shops divert those thicknesses to plasma — which does not give a laser-clean edge and may need machining afterwards. At 20 kW we cut carbon steel up to 30 mm at laser quality.

On volume work the difference lands in time. Faster cutting means more parts per machine hour, which lowers cost per piece. That is the technical reason our quotes tend to be competitive on higher quantities.

Carbon steel (black, pickled, cold-rolled), stainless 304 and 316, aluminium, galvanized and Zn-Al-Mg coated sheet, and Hardox wear plate. On coated material we run parameters that preserve the coating — important on galvanized sheet if you want to avoid corrosion problems later.

Where laser stops being economical, our plasma and oxy-fuel lines take over; we tell you which process suits your part when we quote.

Kayseri has a dense manufacturing base — machinery, agricultural equipment, furniture, defence and automotive supply. Most of these manufacturers prefer subcontracting over installing their own laser: the machine investment, maintenance and operator cost rarely make sense against uneven workload.

We are set up for exactly that, taking work from one-off prototypes through to series production. Being inside the OSB means most customers can collect the same day, cutting out freight and waiting time.

If the part needs bending, welding or surface treatment after cutting, it continues under the same roof. Shuttling a part between workshops is what damages lead times and tolerances most.

The fastest route is a DXF: cut length and hole count are read directly, so the price firms up quickly. Without a DXF, a PDF, dimensioned sketch or clear photo works. Just add material, thickness and quantity.

You can also upload your drawing to the AI assistant on this site for a first assessment and a weight figure; our technical team then confirms price and lead time.

Our plant is located on 18. Cadde in Kayseri Organized Industrial Zone. Manufacturers within the OSB usually collect the same day; shipping across Kayseri and the rest of Turkey is organised by us, with site delivery available for large lots.